Tianhui Machine Co.,Ltd
In the actual production work, using the macro program to process the circular halved hole in the FAUNC numerical control system, it belongs to the pediatrics for everyone, but it is necessary to take some troubles in the machining of the circumferential aliquot. In the usual processing, encounter One way to equally divide the counterbore into the circumference is to use a forming tool for drilling. One method is to use the G52 offset function of the machine to process the machine. If the counterbore is a non-standard hole, the first method will not work. However, the second method is time-consuming and troublesome, and it is prone to errors. Through the practice of these years, a macro program for processing circular unequal holes has been newly developed, which is short and practical.
As shown in the drawing, eight aliquots having a depth of 10 mm and a diameter of 17 mm were milled on a circumference having a radius of 100 mm, and the initial angle of the first hole was 15 degrees.
O0001 (program number)
T10M6 (call milling cutter with diameter 10)
G90G54 (coordinate G54)
G43H10G0Z200 (knife length correction)
S600M3 (speed 600 and steering)
G0Z100 (safe distance Z100)
#1=8.5(uniform hole radius)
#2=11(刀补号 D11-R5.2)
#3=45(angle between holes)
#4=10(sinking depth)
#5=15(Uniform hole starting angle)
#7=10(刀补号 D10-R5)
#8=100 (uniform circle radius)
N10#9=COS[#5]*#8 (hole X coordinate value)
...... (For complete procedures, please refer to Metalworking (Cold Processing), 2013, Issue 9)
......
G3I-#1 (counterclockwise interpolation milling)
G0Z100 (quick drawing to Z100)
G40X0Y0 (cancel the tool offset)
#5=#5+#3 (increase 45 degrees each time)
IF[#5LT#11]GOTO10 (cycle N10 when #5 is less than 360 degrees)
G0Z200 (quick drawing to Z200)
M9 (cutting fluid stop)
M5 (spindle stop)
M30 (end of program)
The above procedure is not only suitable for equally dividing the counterbore in the 360 degree range, but also suitable for equally dividing the inner hole in any angle, but the assignment of #11 is not the same. I hope this macro program will help and inspire everyone's work.
October 14, 2024
September 27, 2024
この仕入先にメール
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
